The AireCell system accepts all 1/4″ panel materials. Gerbig also carries extrusions that allow for .063″ , .125″ , and 1/8″ material to be used.
|Glass||N/A||Panel retainer 9168 and 9169 offset or centered system|
|Aluminum .025||Fluted PVC||Offset or Centered|
|Aluminum .025||Honeycomb Alum||Batten System 1/4″, 1/2″, 3/4″ or 1″ panels.|
|Fire Rated MDF||Medium Density Fiber||Offset or Centered|
|Acrylic||N/A||Offset or Centered|
|Polycarbonate||N/A||Offset or Centered|
|High Pressure Laminate||Wood, Paper||Batten System 1/4″, 1/2″, 3/4″ or 1″ panels.|
Standard finish is white semi-gloss polyester. Kynar is also available for corrosive environments. For conductive panels, anodized aluminum skin is available and offers an order of magnitude lower surface resistance than polyester.
Fire Rated MDF
Melamine thermally fused to the medium density fiber.
High pressure laminate
All surfaces from Wilson Art are available for the batten system.
EPS Foam core panels
Expanded Polystyrene Foam panels are available to provide additional insulating values when design requires. R Value per inch of EPS at 40 degrees and 75 degrees is 3.75 -4.17.